Physical and chemical testing equipment

Direct Reading Spectrometer

American Brandd direct-reading spectrometer: 25 channels, fast spectral analysis of 25 chemical elements, fast analysis process, accurate conclusions and timely; mainly used in the composition analysis of alloy cast steel and cast iron.

Microcomputer fast analyzer

Accurate colorimetric analysis can be performed on castings containing 20 commonly used alloying elements such as Ni, Cr, Mo, and Cu.

Carbon and sulfur high-speed analyzer

It is used for accurate analysis of the five common elements of C, Si, Mn, S and P.

Dual-engine intelligent analyzer

Quickly and accurately analyze and quickly adjust the composition of the furnace liquid metal according to the analysis results to ensure that the casting composition is qualified. The solidification curve of cast iron can be provided, and the tensile strength, elongation and other mechanical indicators of the corresponding material can be given.

Metallographic microscope and metallographic analysis software

Advanced metallographic analysis software is used to observe the metallographic structure and analyze the metal matrix structure, such as detecting the spheroidization level of cooling stave, graphite ball level, ferrite content, and detecting the carburization of cooling stave steel pipes.

Hydraulic universal testing machine

Used for testing the physical properties of metal materials, such as tensile strength, yield strength, elongation, etc.

Impact machine low-temperature freeze 

Used for low-temperature mechanical performance testing of materials

Salt spray test machine

Used for rapid salt spray test of corrosion resistant parts

Impact testing machine

Used to test the impact strength of metal materials, with low temperature refrigeration equipment for -40 ℃ low temperature impact strength test

Rockwell hardness

Used for hardness testing of parts

Leeb Hardness Tester

Used for hardness testing of on-site parts

Ultrasonic detector

Used for internal defect detection of parts